Specifications

Chapter 3 Configuration D8E1T1 Installation and Operation Manual
3-10 Accessing the D8E1T1 Main Menu
Standby SMC not present N+1 Redundancy State: Frozen
Alarm Contacts..: Enabled Alarm Contact Type..: Standard
Nest #1 Slot Summary Menu
N+1
Slot# Group Configured Type Device State Alarm
----- ----- --------------- ------------ -----
01 ---- Not Present None
02 Test Access Online None
03 ---- Not Present None
04 Octal High Speed Online None
05 ---- Not Present None
06 Router Online None
07 ---- Not Present None
08 Hybrid DS-3 Online *Critical
09 ---- Not Present None
10 Octal T1-E1 Online *Major
11 ---- Not Present None
SMCA System Manager A Online None
SMCB System Manager B Not Present Critical
PSX ProtectionSwitch Not Present None
[C]lear error counts [T]oggle Alarm Contacts
N+1 Device Redundancy: Switch[O]ver [R]estore [E]xpose
Figure 3-8. Nest Summary Menu
2. Then place your cursor on the slot number where the D8E1T1 module is
located and press <Enter>. The D8E1T1 Main Menu appears. See main
menu structure in Figure 3-10.
Main Menu
-----------
View Configuration
Diagnostics
N+1 Redundancy
Utilities
About
Figure 3-9. D8E1T1 Main Menu