Specifications

Installing D8E1T1 2-1
Chapter 2
Installation and Operation
2.1 Introduction
This chapter provides installation, configuration, and operation instructions for the
D8E1T1 module.
The information presented in this chapter supplements the DXC-100 installation,
configuration and operation instructions found in the DXC-100 Installation and
Operation Manual.
Before performing any internal settings, adjustment, maintenance, or repairs,
first disconnect all the cables from the module, and then remove the module
from the DXC-100 chassis.
There are no internal settings, adjustments, maintenance, or repairs for either
the operator or the user to make. These activities are performed only by a
skilled technician who is aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
The D8E1T1 module components are sensitive to electrostatic discharge. To
prevent ESD damage, always hold the module by its sides, and do not touch the
module components or connectors. When handling this module, wear an anti-
static wrist strap connected to frame ground to prevent electrostatic discharge from
damaging the circuits.
Warning
ESD
Caution