- Planex Wireless Broadband Router User's Manual

BLW-04EX

2. In the “Comman d Promp t” window, typ e “IPCONFIG /RELEASE”

and press the <ENTER> key.

3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that

your IP address is now 192.168.1.xxx (2-254), your Subnet Mask is

255.255.255.0 and your Default Gateway is 192.168.1.1. These values

confirm that your BLW-04EX is functioning.

4. Type “EXIT” and press <ENTER>.

Internet.” Click “OK.”

Step 3. Obtain IP Settings From Your BLW-04EX

Now that you have configured your computer to connect to your BLW-

04EX, it needs to obtain new network settings. By releasing old IP settings

and renewing them with settings from your BLW-04EX, you will also verify

that you have configured your computer correctly.

1. From the Wind ows desktop, click “Start/ Programs/ Accessories/

Command Prompt.”