- Planex Wireless Broadband Router User's Manual
56
BLW-04EX
55
BLW-04EX
Windows 2000
1. Click the “Start” button and choose “Settings, ” then click “Control
Panel.”
2. Double click the “Network and Dial-up Connections” icon, then “Local
Area Connection” icon, and press the “Properties” button in the
“General” tab.
3. Select the TCP/IP line that has been assigned to your network card in the
“Local Area Connection Properties” window.
4. Click the “Properties” button to set the TCP/IP protocol for the BLW- 0 4 E X .
5. You can dynamically assign TCP/IP address settings to a client, or you
can manually co nfigure a client with address setting s to meet your
specific network requirements. (Note that the default IP address of the
BLW-04EX is 192.168.1.1.)
Windows 95/98/ME
1. Click “Start/Settings/Control Panel.”
2. Double-click the Network icon. Highlight the TCP/IP line that has been
assigned to your network card on the “Configuration” tab of the Network
window.
3. Click the “Properties” button.
4. Y
ou may dynamically assign TCP/IP address settings to a client, or you
can manually configure a client with address settings to meet your
specific network requirements. (Note that the default IP address of the
BLW-04EX is 192.168.1.1.)
5
2
Setting Up TCP/IP to Workwith the BLW-04EX