- Planex Wireless Broadband Router User's Manual

BLW-04EX

5. Choose “Internet Protocol (TCP/IP)” in the Network Protocols. Click the

“OK” button to return to the Network window.

6. The TCP/IP protocol will be listed in the Network window. Click “OK”

to complete the install procedure.

5. Select “Micro soft” in the manufacturers list. Select “TCP/IP” in the

Network Protocols list. Click the “OK” button to return to the Network

window.

6. The TCP/IP protocol will be listed in the Network window. Click “OK”

to complete the installation procedure and restart your PC to enable the

TCP/IP protocols. The operating system may prompt you to restart your

system. Click “Yes” and the computer will shut down and restart

Windows 2000

1. Click the “Start” button and choose “Settings,” then click “Control

Panel.”

2. Double click the “Network and Dial-up Connections” icon, then “Local

Area Con nection ” icon , and press the “Prop erties” button in the

“General” tab.

3. Click the “install...” button to add the network component to your PC.

4. Double click on “Protocol” to add the TCP/IP protocol.