- Planex Wireless Broadband Router User's Manual

24
BLW-04EX
23
BLW-04EX
PPP over Ethernet
E nter the PPPoE user name an d password assigned by your Serv ice
Provider. The Service Name is normally optional, but may be required by
some service providers.
Leave the Maximum Transmission Unit (MTU) on the default value (1492)
unless you have a particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum period of
time for which the Internet connection is maintained during inactivity. If the
connection is inactive for longer than the Maximum Idle Time, it will be
dropped. Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the Internet again.
Click “Finish” to complete the setup. The Status page will open to allow
you to view the connection status, as well as other information. See “Status”
on page 64 for details.
Static IP xDSL
Some xDSL Internet Service Providers may assign a fixed (static) IP
address for your gateway. If you have been provided with this information,
choose this option and enter the assigned IP address, subnet mask, gateway
IP, and DNS IP addresses for the BLW-04EX.
Click “Finish” to complete the setup. The Status page will open to allow
you to view the connection status, as well as other information. See “Status”
on page 64 for details.