Specifications

ASMi-52 Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
Error Detection 6-3
Displaying System Alarms

To display the system alarms:
1. From the Main menu, select Monitoring.
2. From the Monitoring menu, select System Monitoring.
The SystemMonitoring menu appears (see Figure 6-3).
3. Select Device Local Alarms to display the local device alarms or type Device
Remote Alarms to display the remote device alarms.
The Device Alarms screen appears (see Figure 6-4).
ASMi-52
System Monitoring
System local status >
System remote status >
Device local alarms []>
Device remote alarms []>
System log file
System clear log file ...
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 6-3. System Monitoring Menu
ASMi-52
Device local alarms
Source Alarm name Alarm num Severity Status
Local 1 SELF TEST ERROR 1 MAJOR ON
Figure 6-4. Device Alarms Screen
Working With System Log File
ASMi-52 maintains system alarm buffer, which can store up to 100 system alarm
messages. The system log file specifies alarm or event name, severity (major or
minor), status (ON or OFF), and time elapsed since the last ASMi-52 reset.

To display the system log file:
• From the System Monitoring menu (Figure 6-3), select System Log File.
The System Log File screen appears.

To clear the system log file:
1. From the System Monitoring menu (Figure 6-3), select System Clear Log File
to clear the log file.
A confirmation message is displayed at the bottom of the screen.