Specifications

ASMi-52 Installation and Operation Manual Chapter 5 Configuring a Typical Application
Configuring the ASMi-52 units 5-3
3. Select Save to save the changes.

To set the device host IP address:
4. Display the host IP menu (Main menu > Configuration > System
configuration > Management > Host IP.
The host IP screen appears.
5. From the host IP menu, configure the following:
 CO ASMi-52 – 123.456.78.90
 CPE ASMi-52 – 123.456.78.91
 Host IP mask – 255.255.255.1
 Host default gateway IP address – 255.255.255.2
ASMi-52
Host IP
Host IP address (123.456.78.90)
Host IP mask (255.255.255.1)
Host default gateway (255.255.255.2)
Read community (public)
Write community (public)
Trap community (public)
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
6. Press ESC to return to previous menu (Management screen).
7. Save the changes.
Setting the Line Interface
Set the line interface wire mode to 4-wire.

To set the wire mode:
1. Display the Configured wire screen (Main menu > Configuration > Physical
Ports Configuration > SHDSL Configuration > SHDSL Port Configuration).