Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-42 Updating Software Releases

To display the software version:
1. From the SW Files menu, (File Utilities menu > File System > SW files), select
Local SW Files to display software revision of the local ASMi-52, or select
Remote SW Files to display software revision of the remote device.
The Local or Remote Software Version screen appears (see Figure 4-44).
SW files
Software active version: 1.00A05
Software active partition: 0
Code size: 683027
Date: 17-7-3
Software backup version: 0.00n00
Software backup partition: 1
Code size: 0
Date: 0-0-0
Boot version: 1.20
Boot mng version: 6.00
Press any key to continue...
ESC-prev.menu; !-main menu; &-exit
Figure 4-44. Local Software Version Screen
Switching the Software Versions
If an active software becomes corrupted, you can switch it with the backup in the
local ASMi-52 units.

To swap software versions:
1. Follow the path: File Utilities menu > File System > Swap SW files.
The Swap SW Files menu appears.
2. From the Swap SW Files menu, select Swap Local SW Files to switch files in the
local ASMi-52.
ASMi-52 displays the following message:
Request to swap SW files!!! Confirm Y/N
3. Type Y to confirm the file swap.
ASMi-52 performs the swap and sends the following string:
Program Switching
Active software becomes backup and vice versa. At this stage, ASMi-52 is
automatically reset.
If you try to switch the software versions when only one version is available,
ASMi-52 responds with the following message:
Impossible to switch – no other program
Press any key to continue