Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-32 Configuring the Physical Ports

To access the E1 Port Configuration menu:
1. From the Physical Ports Configuration menu, select E1 Configuration.
The E1 Configuration menu appears.
2. From the E1 Configuration menu, select E1 local port configuration for the
local port configuration or select E1 remote port configuration for the remote
port configuration.
The E1 Port Configuration menu appears (see Figure 4-35).
ASMi-52
E1 Local Port Configuration
1. Framed mode (G732N)
2. Sync mode (CCITT(complies with G732))
3. CRC-4 (NO)
4. Idle code (ff)
5. Time slots assign
6. Units identical setting (Yes)
7. Save
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-35. E1 Port Configuration Menu
Selecting E1 Framing Mode

To select E1 framing mode:
1. From the E1 Port Configuration menu, select Framed Mode.
The Framed Mode menu appears (see Figure 4-36).
2. From the Framed Mode menu, select Unframed to choose unframed
operation, type G732N to select G732N framing mode, or select G732S
transparent to choose G732S transparent framing mode.
The E1 Port Configuration menu appears.
3. Save the changes.
ASMi-52
Framed mode (Unframed)
1. Unframed
2. G732N
3. G732S transparent
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-36. Framed Mode Menu