Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual
4-22 Configuring ASMi-52 System Parameters

To access Terminal menu:
• From the Port Control menu, select Terminal.
The Terminal menu appears (see Figure 4-26).
ASMi-52
Terminal
1. Change access >
2. POP ALARM (OFF)
3. Security timeout (10 min)
4. Save
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-26. Terminal Menu

To change the user name and password:
1. From the Terminal menu, select Change Access.
The following dialog appears:
ASMi-52
Change Access
1. User name ...()
2. Password ...
3. Clear User Name ...
4. Clear Password ...
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
2. Select User Name to enter a new user name, select Password to enter a new
password, select Clear User Name to delete the current user, or Clear User
Name to delete the current password.
3. Enter a new user name or password and press <Enter>.
The Terminal menu appears.
4. From the Terminal menu, select Save to save the changes.

To enable or disable the pop-up alarms:
When the pop-up function is enabled, ASMi-52 displays the active alarms at the
bottom of the terminal screen. When the fault condition that caused the alarm is
cleared, the alarm is removed from the screen
1. From the Terminal menu, select Pop Alarm to choose the pop-up alarms mode:
ON (pop-up alarms are enabled) or OFF (pop-up alarms are disabled).
The display is refreshed and the new value appears.
2. Select Save to save the changes.