Specifications

ASMi-52 Installation and Operation Manual Chapter 4 Managing ASMi-52 via a Terminal
Configuring ASMi-52 System Parameters 4-13
ASMi-52
Manager List
1. MNG 1 IP ... (0.0.0.0) 12. MNG 2 MASK ... (0.0.0.0)
2. MNG 2 IP ... (0.0.0.0) 13. MNG 3 MASK ... (0.0.0.0)
3. MNG 3 IP ... (0.0.0.0) 14. MNG 4 MASK ... (0.0.0.0)
4. MNG 4 IP ... (0.0.0.0) 15. MNG 5 MASK ... (0.0.0.0)
5. MNG 5 IP ... (0.0.0.0) 16. MNG 6 MASK ... (0.0.0.0)
6. MNG 6 IP ... (0.0.0.0) 17. MNG 7 MASK ... (0.0.0.0)
7. MNG 7 IP ... (0.0.0.0) 18. MNG 8 MASK ... (0.0.0.0)
8. MNG 8 IP ... (0.0.0.0) 19. MNG 9 MASK ... (0.0.0.0)
9. MNG 9 IP ... (0.0.0.0) 20. MNG 10 MASK ... (0.0.0.0)
10. MNG 10 IP ... (0.0.0.0)
11. MNG 1 MASK ... (0.0.0.0)
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-14. Manager List Menu
Controlling the Management Access
You can enable or disable access to the ASMi-52 management system via SNMP,
Telnet or Web-based application (ConfiguRAD). By disabling SNMP or Telnet, you
prevent unauthorized access to the system when security of the ASMi-52 IP address
has been compromised. When SNMP, Telnet and Web access is disabled,
ASMi-52 can be managed via an ASCII terminal only.

To define the management access method:
1. From the Management menu, select Management Access.
The Management Access menu appears (see Figure 4-15).
2. From the Management Access menu, select SNMP Allowed to enable SNMP
access, select TELNET Allowed to enable Telnet access, or select WEB Allowed
to enable management via Web browser.
The access value toggles between Access Allowed and No Access.
Currently the SNMP Allowed parameter is permanently set to Access Allowed.
3. Press <Enter> when a desired value is displayed.
4. Press <Esc> to return to the Management menu (see Figure 4-11).
5. From the Management menu, select Save to save your changes.
Note