Specifications
ASMi-52 Installation and Operation Manual Chapter 4 Managing ASMi-52 via a Terminal
Entering the User Name and Password 4-5
Navigating the ConfiguRAD Menus
ConfiguRAD is a Web-based remote access terminal management software. It
provides a user-friendly interface for configuring, collecting statistics and performing
diagnostic tests on the ASMi-52 units.
To choose an option:
1. Click a link in the ConfiguRAD screen to display the next menu.
2. Once the target screen is displayed, select a value from the drop-down box or
enter it in a text box.
Some of the ASMi-52 menus have a 'Save' option. When choosing options from
these menus, you must confirm your choice by selecting 'Save', otherwise your entry
will be ignored.
At the left-hand bottom corner ConfiguRAD provides some auxiliary management
tools:
• Status – shows the number of users currently managing ASMi-52
• Trace – opens an additional pane for system messages, progress indicators (ping,
software and configuration file downloads) and alarms. It is recommended to
keep the trace pane open all the time.
• Refresh All – refreshes performance registers.
Logging Out
To end the current session:
• In the Main menu, click Logout or type & in a terminal management screen.
ASMi-52 allows only one management session to be active at a time. If the
Web-based management session was not ended properly (for example, by closing the
Web browser window), you have to wait five minutes before attempting the next log-
in. If you try to log in during the five-minute security timeout, ASMi-52 does not
allow to proceed to the Main menu, displaying ‘Too Many Users’ message. Likewise,
the Web-based management session cannot be initiated, if a terminal or Telnet
session is still in progress.
4.3 Entering the User Name and Password
Once you have installed the ASMi-52 modems at the central and remote locations,
and completed the installation and operation procedures described in Chapter 2
and Chapter 3, you can start a control session.
You have to enter a user name and password in order to start the ASMi-52
management software (see Figure 4-3 and Figure 4-4).
Note