Specifications

Chapter 4 Managing ASMi-52 via a Terminal ASMi-52 Installation and Operation Manual

4-4 Navigating the Management Menus

4.2 Navigating the Management Menus

This section provides a general description of the software menu operation and

conventions for navigating the menus.

Appendix C shows a map of the management menus in the ASMi-52 embedded

software.

Choosing Options



To choose an option (terminal session):

• Type the number corresponding to the option, and press <Enter>.

The screen for the selected option is displayed.

When a menu option has only two values, typing the option number and pressing

<Enter> will scroll between the available values.

Some of the ASMi-52 menus have a 'Save' option. When choosing options from these

menus, you must confirm your choice by typing the number corresponding to the

'Save' option, otherwise your entry will be ignored.



To choose an option (ConfiguRAD session):

1. Click a link in the ConfiguRAD screen to display the next menu.

2. Once the target screen is displayed, select a value from the drop-down box.

Correcting Entries



To correct an erroneous entry:

• Press <Backspace> to clear the error, then enter the correct characters.

Press <Esc> to exit the current menu, and then return to the menu to re-enter

the required value.

Navigating Data Forms

Some of the ASMi-52 management software screens are data forms, which are

bigger than regular menus and require scrolling to navigate between parameters.

For example, the Inventory screen (Figure 4-7) or Manager List menu (Figure 4-11)

are considered data forms.

Use the following keys (case-sensitive) for the data form navigation:

• L – move left, l – scroll left,

• R – move right, r – scroll right

• U – move up, u – scroll up

• D – move down, d – scroll down

• <Tab> – select next changeable cell.

You can display these navigation keys by typing <?> from a data form.

Note