Specifications

ASMi-52 Installation and Operation Manual Chapter 4 Managing ASMi-52 via a Terminal
Preparing for a Control Session 4-3
Figure 4-1. ConfiguRAD Login
Managing ASMi-52 via Dedicated Timeslot
ASMi-52 modems with E1 or T1 interface can be managed via dedicated E1/T1
timeslot (DTS) (see Figure 4-2).
The DTS is a management channel that connects directly to ASMi-52 host using a
separate IP interface, i.e. separate IP address and IP mask. If the LAN and dedicated
timeslot services are configured to have the same IP, the management session over
dedicated timeslot has priority over management via 10/100BaseT port.
1. Connect E1/T1 line to the ASMi-52 E1 or T1 port.
2. Start a terminal management session and do the following:
 Assign IP address and IP mask to the dedicated timeslot interface
 Enable DTS management
 Assign E1/T1 timeslot for the management traffic
3. Run an SNMP management application, such as RAD’s RADview, open Telnet
session, or manage ASMi-52 via
ConfiguRAD
.
10/100BaseT
Management Port
10/100BaseT
Management Port
SHDSL Link
Network
Management Station
Network
Management Station
E1 Port on
DE1B Module
E1
Port
Management Traffic over
Dedicated Timeslot
DXC
ASMi-52
Management Traffic
over IP
Management Traffic
over IP
Figure 4-2. Managing ASMi-52 via LAN Port and Dedicated Timeslot