Specifications

Chapter 4 Configuration Installation and Operation Manual
4-6 Configuring ASMi-52 for Management ASMi-52 Ver. 2.8
In the Map Timeslot menu ( Figure 4-30 ), the dedicated timeslot value
changes to MNG (management).
ASMi-52
DTS Configuration
DTS Mode (DISABLE)
1. DTS to CPE (ON)
2. DTS IP address ... (0.0.0.0)
3. DTS IP mask ... (0.0.0.0)
4. Rem Agent Table []>
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-7. DTS Configuration Menu
ASMi-52
Rem Agent Table
SOURCE IP DESTINATION IP PORT
>
ESC-prev. menu; !-main menu; &-exit; @-scroll; ?-help
Figure 4-8. Rem Agent Table
Configuring VLAN Encapsulation
ASMi-52 is occasionally connected to a VLAN network when management VLAN
messages are required. Virtual LANs enable network managers to group users
logically rather than by physical location. A virtual LAN (VLAN) is an emulation of a
standard LAN that allows data transfer and communication to occur without the
traditional restraints placed on the network.
The VLAN encapsulation feature enables or disables a user to work in VLAN mode,
identify the user to give the user the proper VLAN permissions and to prioritize a
VLAN session.
³ To enable VLAN mode:
1. From the Management menu (Main menu > Configuration > System
Configuration > Management > VLAN Encapsulation), select VLAN
Encapsulation (see
Figure 4-9 ).
The VLAN Encapsulation is displayed.
2. From the VLAN Encapsulation menu, select VLAN mode.
3. Enable the VLAN mode feature.
4. Select VLAN Management ID to identify the user.
The identification will grant the user VLAN support.
5. Select the VLAN Priority option if you wish to prioritize the session.