Specifications

Chapter 4 Configuration Installation and Operation Manual
4-4 Configuring ASMi-52 for Management ASMi-52 Ver. 2.8
Configuring the Network Managers
Define or modify the network management stations to which the SNMP agent of
ASMi-52 will send traps. Up to ten managers can be defined. Entering the IP
address and corresponding subnet mask to define each management station.
³ To configure the network managers:
1. Display the Manager List menu. (Main menu > Configuration > System
Configuration > Management > Manager List).
The Manager List menu appears (see
Figure 4-5 ).
2. From the Manager List menu, type a number corresponding to the network
management station that you intend to define or modify, and enter its new
IP address.
3. Type a number corresponding to a subnet mask of the already defined
network management station, and enter a new value.
4. Repeat step 2 and step 3 to define additional management stations.
5. Press <Esc> to return to the Management menu (see
Figure 4-1 ).
6. From the Management menu, select Save to save your changes.
ASMi-52
Manager List
1. MNG 1 IP ... (172.17.160.104) 12. MNG 2 MASK ... (0.0.0.0)
2. MNG 2 IP ... (172.17.160.68) 13. MNG 3 MASK ... (0.0.0.0)
3. MNG 3 IP ... (0.0.0.0) 14. MNG 4 MASK ... (0.0.0.0)
4. MNG 4 IP ... (0.0.0.0) 15. MNG 5 MASK ... (0.0.0.0)
5. MNG 5 IP ... (0.0.0.0) 16. MNG 6 MASK ... (0.0.0.0)
6. MNG 6 IP ... (0.0.0.0) 17. MNG 7 MASK ... (0.0.0.0)
7. MNG 7 IP ... (0.0.0.0) 18. MNG 8 MASK ... (0.0.0.0)
8. MNG 8 IP ... (0.0.0.0) 19. MNG 9 MASK ... (0.0.0.0)
9. MNG 9 IP ... (0.0.0.0) 20. MNG 10 MASK ... (0.0.0.0)
10. MNG 10 IP ... (0.0.0.0)
11. MNG 1 MASK ... (0.0.0.0)
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-5. Manager List Menu
Controlling the Management Access
You can enable or disable access to the ASMi-52 management system via Telnet
or a Web-based application (ConfiguRAD). By disabling Telnet, you prevent
unauthorized access to the system when security of the ASMi-52 IP address has
been compromised. When Telnet and Web access are disabled, ASMi-52 can be
managed via an ASCII terminal only.