Specifications

Chapter 4 Configuration Installation and Operation Manual
4-2 Configuring ASMi-52 for Management ASMi-52 Ver. 2.8
•
DTS Configuration is available only for the units with the E1/T1 DTE interfaces.
MTU means Maximum Transfer Unit.
Entering Device Information
The Device Information menu allows you to assign a name to ASMi-52, define its
location, and contact person. These entries may include up to 20 characters.
³ To enter device information:
1. Display the Sys Contact menu (Main menu > Configuration > System
Configuration > Management > Device Info > Sys Contact)
and enter the
name of a contact person.
2. Display the Sys Location menu (Main menu > Configuration > System
Configuration > Management > Device Info > Sys Location) and enter the
description of the ASMi-52 location.
3. Display the Sys Name menu (Main menu > Configuration > System
Configuration > Management > Device Info > Sys Name)
and enter the name
of the unit.
4. Press <Esc> to return to the Management menu (see
Figure 4-1 ).
5. From the Management menu, select Save to save your changes.
³ To clear system parameters:
1. From the Device Info menu, select Clear Sys Params (Main menu >
Configuration > System Configuration > Management > Device Info > Clear
Sys Params).
ASMi-52 displays the following message:
ASMi-52
Clear sys params
Are you sure !!! Clear (Y/N)
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-2. Clear Sys Params Prompt
2. Type Y to confirm the deletion.
ASMi-52 deletes all device info parameters.
Notes