Specifications

Chapter 3 Operation Installation and Operation Manual
3-12 Configuration and Management Alternatives ASMi-52 Ver. 2.8
2. Once the target screen is displayed, select a value from the drop-down box or
enter a value in a text box.
Some of the ASMi-52 menus have a 'Save' option. When choosing options
from these menus, you must confirm your choice by selecting 'Save',
otherwise your entry will be ignored.
At the left-hand bottom corner, ConfiguRAD provides some auxiliary
management tools:
Status – shows the number of users currently managing ASMi-52
Trace – opens an additional pane for system messages, progress indicators
(ping, software and configuration file downloads) and alarms. It is
recommended to keep the trace pane open all the time.
Refresh All – refreshes all screen elements.
³ To end the current session:
In the Main menu, click Logout.
• ASMi-52 allows at least four management sessions to be active at a time. If
the Web-based management sessions were not ended properly (for example,
by closing the Web browser window), you have to wait five minutes before
attempting the next log-in. If you try to log in during the five-minute security
timeout, ASMi-52 does not allow to proceed to the Main menu, displaying ‘Too
Many Users’ message. Likewise, the Web-based management session cannot
be initiated, if a terminal or Telnet session is still in progress.
• One session is always reserved as a terminal session from the four available
management sessions, the other three sessions can be a ConfiguRAD or
Telnet sessions. The four sessions can function at the same time.
Working with RADview
RADview-EMS/TDM is a user-friendly and powerful SNMP-based application for
management and service provisioning. It offers pseudowire service provisioning,
as well as embedded element management capabilities.
RADview-EMS/TDM provides a dedicated graphical user interface (GUI) for
monitoring RAD products via their SNMP agents. RADview agent for ASMi-52 is
bundled in the RADview-EMS package for PC (Windows-based) or Unix.
For more details about this network management software, and for detailed
instructions on how to install, set-up and use RADview – contact your local
distributor or refer to the RADview-EMS documentation.
Working with SNMP
ASMi-52 can be managed via a third-party SNMP-based NMS (refer to Chapter 6
for trap list).
Note