Specifications

Installation and Operation Manual Chapter 3 Operation
ASMi-52 Ver. 2.8 Configuration and Management Alternatives 3-11
• Firefox 1.0.4 and up, running on Windows™
• Mozilla 1.4.3 and up, running on Linux.
However, before using Web access, it is necessary to perform a preliminary
configuration of ASMi-52.
When using a Web browser, pay attention to the following points:
• Enable scripts
• Configure the firewall that is probably installed on your PC to allow access to
the destination IP address
• Disable pop-up blocking software (such as Google Popup Blocker); you may
also have to configure your spyware/adware protection program to accept
traffic from/to the destination IP address
• Browsers store the last viewed pages in a special cache. To prevent
configuration errors, it is absolutely necessary to flush the browser’s cache
whenever you return to the same screen.
Working with ConfiguRAD
ConfiguRAD is a Web-based remote access terminal management software. It
provides a user-friendly interface for configuring, collecting statistics, and
performing diagnostic tests on the ASMi-52 units.
³ To start the ConfiguRAD session:
1. Start a Web browser.
2. Disable any pop-up blocking software, such as the Google Popup Blocker.
3. Enter the IP address of the ASMi-52 in the address field of the browser in the
following format: http://<IP address> and then press <Enter> to command
the browser to connect (IP address stands for the actual ASMi-52 IP address
which has to be assigned via an ASCII terminal).
4. In the Login screen, click LOGIN to start the ConfiguRAD management
session.
Figure 3-9. ConfiguRAD Login
³ To choose an option:
1. Click a link in the ConfiguRAD screen to display the next menu.