Specifications

Installation and Operation Manual Chapter 3 Operation
ASMi-52 Ver. 2.8 Default Settings 3-5
Type Parameter Default Value
DTS IP mask 0.0.0.0
LAN Configuration LAN operation mode Transparent
Encapsulation CRC No
Bridging Mode Access only
Aging Timeout 10
Autonegotiation Enable
LAN Rate 1. Single 2-wire – 192 kbps
4-wire – 384 kbps
2. E1+LAN N/A (0 kbps)
3. Serial DTE+LAN N/A (0 kbps)
Max AutoNeg Capability 100BaseT full duplex mode
Control Port Control port rate 9600 bps
Data 8
Parity None
Interface DCE
CTS =RTS
DSR ON
Port control mode Terminal
User name –
Password 1234
Pop alarm OFF
Security timeout 10 min
Call Out Mode None
Number of retries 1
Wait for connect 30 sec
Dial mode Tone
Alternate number mode Disable
Primary number –
Alternate number –
SHDSL Interface Transmission mode Annex B
Power backoff Enable
Snext margin Disable
Current margin Disable
Asym PSD Symmetrical