Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
ASMi-52 Ver. 2.8 Mounting the Rail Mount Unit 2-3
Figure 2-1. Rack Mount Fittings
³ To remove a rail mounted unit:
1. Insert a small flat screwdriver into the hole at the end of the spring-loaded
mounting bracket at the bottom rear of the unit (see
Figure 2-2 .)
Figure
2-2. Removing the Unit
2. While supporting the unit from below, press the mounting bracket down with
the screwdriver, and lift the unit carefully forward, away from the rail mount.
Insert screwdriver here