Specifications

Chapter 7 Application Tutorial Installation and Operation Manual
7-16 Equipment List ASMi-52 Ver. 2.5
Event Reporting
Traps that are the result of events that were already reported by a different trap
may not be repeated. For example, LOC traps will not be sent if the physical layer
trap, such as LOS, was sent and the physical layer problem still exists.
The events are layered hierarchically, for example physical layer events/traps for
Loop Attenuation and SNR Margin are threshold triggered, so that an event/trap
is sent only if the threshold was exceeded.
Threshold can be configured for up to 8000 events per second.
The Event Log file contents can be viewed via an ASCII control terminal or a
Network Management Station (NMS).
³ To view the Event Log file via NMS:
• From the LRS-16 zoom application window, select Fault> History Log.
³ To clear the Event Log file:
• From the LRS-16 zoom application window, select Fault> History Log Clear.
Figure 7-23. Access to the Event Log File via the Network Management Station