Specifications

Chapter 7 Application Tutorial Installation and Operation Manual
7-10 Equipment List ASMi-52 Ver. 2.5
LRS-16
Configuration>Physical Layer>E1
1. E1 Link Number[1 - 16] ... (1)
2. Administrative Status (Up)
3. User Name ... (E1-1)
4. Interface Type (Balanced)
5. Link Type > (G.732N)
6. Idle Code[0 - ff] ... (7C)
7. Transmit Clock > (Internal)
8. TS0 Mode (Transparent)
9. Mask Link alarms (Disable)
10. Rem_CH1_TS_NUM[0 - 32] ... (0)
11. TS Assignment >
>
f-Forward; b-Backward
ESC-Previous menu; !-Main menu; &-Exit 1 M/ 1 C
Figure 7-14. E1 Configuration Screen
Configuring the the SHDSL Link
³ To configure the SHDSL link:
1. Navigate to Main Menu> Configuration> Physical Layer> SHDSL.
The SHDSL Link Configuration screen appears.
2. Set the Administrative Status to Up to activate the SHDSL port.
3. Press <S> to save the changes.
LRS-16
Configuration>Physical Layer>SHDSL
1. Line Number[1-16] ... (1)
2. Administrative Status (Up)
3. STU (Central)
4. Power Backoff[0 - 31] ... (0)
5. Transmission Mode (Annex B)
6. Loop Attenuation Threshold (dB) [0 - 127] ... (0)
7. SNR Margin Threshold (dB) [0 - 15] ... (0)
8. Reset line
9. Mask line alarms ()
10. SHDSL Remote >
11. Open Virtual Terminal Session
>
f-Forward; b-Backward
ESC-Previous menu; !-Main menu; &-Exit 1 M/ 1 C
Figure 7-15. SHDSL Link Configuration Screen