Specifications

Installation and Operation Manual Chapter 7 Application Tutorial
ASMi-52 Ver. 2.5 Equipment List 7-9
Setting Date and Time
The Date and Time screen is used to configure the NTP client parameters.
³ To configure the NTP client parameters:
1. Select Main Menu> Configuration> System> Date and Time.
The Date and Time screen appears. Set the parameters as prompted in
the screen.
2. Press <S> to save the changes.
LRS-16
Configuration>System>Date and Time
1. Date ...(2000-01-01)
2. Time ...(00:00:00)
>
ESC-Previous menu; !-Main menu; &-Exit 1M/ 1C
Figure 7-13. Date and Time Screen
Configuring Physical Layer Parameters
LRS-16 has 16 SHDSL interfaces and 16 E1 interfaces. The SHDSL and E1
configuration menus are accessed from the Physical Layer menu.
Configuring the E1 Port
³ To configure the E1 port:
1. Navigate to Main Menu> Configuration> Physical Layer> E1 Port.
The E1 configuration screen appears (
Figure 7-14 ).
2. Set the Administrative Status to Up to activate the E1 port.
3. Set the other parameters required by your system if needed.
4. Press <S> to save the changes.