Specifications

Chapter 7 Application Tutorial Installation and Operation Manual
7-2 Equipment List ASMi-52 Ver. 2.5
Installing LRS-16
Before starting configuration, install the unit as follows:
1. Connect the LAN to the MNG-ETH port of the LRS-16 device using straight
Ethernet cable with RJ-45 connector.
Figure 7-2. Connecting MNG-ETH to Computer
2. Connect the E1 provider to the E1 port of the LRS-16 device using straight E1
cable with RJ-45 connector.
Unbalanced E1 interface is provided via CBL-RJ45/2BNC/E1 adaptor cable.
Figure 7-3. Connecting E1 to E1 Provider (PBX)
3. Connect two ASMi-52 devices to the SHDSL two-wire ports of the LRS-16
using split E1 cable with RJ-45 connectors.
Note
Ethernet Copper Cable
with RJ-45 Connectors
E1 Cable
with RJ-45 Connectors
LAN Port on a PC
RJ-45 E1 Port
PBX