Specifications

Chapter 6 Software Upgrade Installation and Operation Manual
6-10 Upgrading ASMi-52 Software via the Boot Menu ASMi-52 Ver. 2.8
If no default gateway is needed, for example, because the TFTP
server is attached to the same LAN as ASMi-52 being loaded, enter
0.0.0.0.
2. Press <Enter> to display the Boot menu.
3. Select Perform Reset to the board to reset ASMi-52. The new parameters
take effect only after the resetting is completed.
³ To download software from the Boot menu using TFTP:
1. From the Boot menu, select Download an Application by TFTP and then press
<Enter> to start the TFTP transfer.
Please Enter the Target File Name message is displayed.
2. Enter the name of the desired software distribution file (make sure to include
the path, when necessary). When done, press <Enter> to continue.
Please Enter the Server IP address message is displayed.
3. Enter the IP address of the server on which the software distribution file
resides and then <Enter> to continue.
If no errors are detected, the downloading process starts, and the screen
displays its relative progress.
4. After the transfer is successfully completed, return to the Boot menu and
select Exit Boot-Manager.
When the ASMi-52 initialization is ended, the unit loads the new
software.
If downloading failed, repeat the whole procedure.
Note