Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
ASMi-52 Ver. 2.8 Monitoring Performance 5-5
• For details on enabling the CRC-4 function, refer to Chapter 4 .
• For the details on configuring T1 framing, refer to Configuring T1 Interface in
Chapter 4.
Displaying the Current E1/T1 Statistics
³ To display the current E1/T1 statistics:
1. From the Physical Port Statistics menu (
Figure 5-1 ), select E1/T1 Port
Performances to display the local/remote unit E1/T1 statistics.
The E1/T1 Port Performances menu appears (see
Figure 5-7 ).
2. From the E1/T1 Port Performance menu, select E1/T1 Current Performances
to display the current E1/T1 statistics or select E1/T1 Current Day
Performances to display the current day statistics.
The E1/T1 Port Performances screen appears (see
Figure 5-8 , and
Figure 5-9 ).
3. Press any key to exit the E1/T1 Performances screen.
ASMi-52
E1/T1 Port Performances
1. E1/T1 current performances ...
2. E1/T1 all intervals local performances ...
3. E1/T1 all intervals remote performances ...
4. E1/T1 current day performances ...
5. E1/T1 clear local performances
6. E1/T1 clear remote performances
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 5-7. E1/T1 Port Performances Menu
If CRC-4 is disabled, a typical E1/T1 Current Performance screen will include
only BPV statistics, as shown in
Figure 5-8 and Figure 5-9 .
ASMi-52
E1/T1 current performances
Local Remote
Port number (1)
BPV last minute (0) (0)
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 5-8. E1/T1 Current Performances Screen
Note