Specifications

Chapter 4 Configuration Installation and Operation Manual
4-46 Performing Additional Tasks ASMi-52 Ver. 2.8
³ To download a configuration file to the target device(s):
1. From the SW & File Transfer, select Auto Configuration (Main menu > File
Utilities > SW & File Transfer > Auto Configuration) to select an auto-
configuration type.
The Auto Configuration menu is displayed.
2. Select Command (Upload/Download Full/Part Download) and select Download
Full/Part to download the file (see
Figure 4-48 ).
3. Select TFTP or XMODEM (as in software download).
Displaying the Software Version
You can display the information on the software revision of the local or remote
modem. The information includes a description of the active program, which is
currently used by ASMi-52, and also details on the passive software kept for
backup purposes.
³ To display the software version:
• From the File System menu (Main menu > File Utilities > File System > SW
Files), select SW Files to display the software revision of the ASMi-52 device.
The Software Version menu appears (see
Figure 4-48 ).
ASMi-52
SW files
Local Remote
Software active version: (2.01E24) (2.02000)
Software active partition: (0) (0)
Code size: (813110) (813161)
Date: (28-7-4) (2-8-4)
Software backup version: (2.01E24) (2.01E11)
Software backup partition: (1) (1)
Code size: (813110) (809233)
Date: (28-7-24) (9-6-4)
Boot version: (1.10) (1.10)
Boot mng version: (5.34) (5.34)
Press any key to continue...
ESC-prev. menu; !-main menu; &-exit
Figure 4-48. Software Version Screen
Switching Software Versions
If an active software becomes corrupted, you can switch it with the backup in the
local ASMi-52 units.