Specifications

Chapter 6 Troubleshooting and Diagnostics ASMi-52L Installation and Operation Manual
6-16 Technical Support
Running the LEDs Test
The user can perform the front-panel LED test to verify that the local unit
indicators are functioning properly.

To run the LEDs test:
1. From the Diagnostics menu (see Figure 6-12), select Local Test to run the LEDs
test on the local ASMi-52L.
The Local Test menu is displayed (see Figure 6-13).
2. Select LEDs Test.
All the front-panel LED indicators light up for two seconds.
6.6 Technical Support
Technical Support for this product can be obtained from the local distributor from
whom it was purchased.
For further information, please contact the RAD distributor
nearest you or one of
RAD's offices
worldwide.