Specifications

ASMi-52L Installation and Operation Manual Chapter 4 Configuration
Additional Tasks 4-29
Switching the Software Versions
If an active software becomes corrupted, you can switch it with the backup in the
local ASMi-52L units.

To swap software versions:
1. Follow the path: File Utilities menu > File System > Swap SW files.
The Swap SW Files menu appears.
2. From the Swap SW Files menu, select Swap Local SW Files to switch files in the
local ASMi-52L.
ASMi-52L displays the following message:
Request to swap SW files!!! Confirm Y/N
3. Type Y to confirm the file swap.
ASMi-52L performs the swap and sends the following string:
Program Switching
Active software becomes backup and vice versa. At this stage, ASMi-52L is
automatically reset.
If you try to switch the software versions when only one version is available,
ASMi-52L responds with the following message:
Impossible to switch – no other program
Press any key to continue
Performing Automatic Configuration
The ASMi-52L configuration can be uploaded or downloaded to and from other
units. The configuration must be for like versions only.
A full download option is available which overwrites the IP addresses and the
system details such as contact name, or a partial download where the above details
are left intact, and only the system configuration is downloaded.

To upload configuration:
1. Follow the path: File Utilities > SW Download > Auto Configuration >
Command
2. Select Upload.

To download configuration:
1. Follow the path: File Utilities > SW Download > Auto Configuration >
Command
2. Select one of the following:
 Download Full for a full download of the ASMi-52L configuration including
system parameters.
 Download Partial for a download of the configuration only.