Specifications

Chapter 4 Configuration ASMi-52L Installation and Operation Manual
4-6 Configuring ASMi-52L System Parameters
ASMi-52L
Configuration >
1. System configuration >
2. SHDSL configuration >
3. DTE/LAN configuration
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-7. Configuration Menu
The ASMi-52L system configuration allows you to perform the following:
• Configuring master clock
• Defining management parameters (IP parameters, system information etc)
• Defining control port parameters
• Resetting ASMi-52L to the defaults
• Performing the overall reset of the device or resetting its SHDSL interface.

To display the System Configuration menu:
• From the Configuration menu, select System Configuration.
The System Configuration menu appears (see Figure 4-8).
ASMi-52L
System Configuration >
1. Master clock >(Internal)
2. Management >
3. Control port >
4. Factory default >
5. Reset >
6. Save
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-8. System Configuration Menu
Configuring the Master Clock
ASMi-52L modems support receive, external and internal clock modes. However, in
the Ethernet ASMi-52L versions the Internal clock mode is disabled.
When configured to the internal or external clock, ASMi-52L modem operates as an
STU-C unit. When configured to the receive clock, ASMi-52L operates as an STU-R
unit.

To configure the master clock:
1. From the System Configuration menu, select Master Clock.
The Master Clock menu appears (see Figure 4-9).
2. From the Master Clock menu, select the appropriate clock by choosing Receive,
Internal, or External.