Specifications

Configuring ASMi-52L for Management 4-1
Chapter 4
Configuration
The configuration of ASMi-52L is performed via menu-driven embedded software,
using a standard ASCII terminal or a PC running a terminal emulation application
connected to the rear panel CONTROL port. Alternatively, ASMi-52L can be
managed from a Telnet host connected to the 10/100BASE-T port on the rear
panel.
4.1 Configuring ASMi-52L for Management
This section describes how to prepare ASMi-52L and the supervisory terminal for a
control session.
Configuring Management Parameters
You must define the ASMi-52L internal SNMP agent parameters in order to enable
SNMP and Telnet management (see Figure 4-1). Also you can enter additional
information about your ASMi-52L, such as contact person, unit location etc.

To access the Management menu:
• From the System Configuration menu, select Management.
The Management menu appears (Figure 4-1).
ASMi-52L
Management
1. Device Info >
2. Host IP >
3. Manager List >
4. Management access >
5. MTU (64 - 1540) ...(1540)
6. Save
>
ESC-prev.menu; !-main menu; &-exit; @-scroll
Figure 4-1. Management Menu
Entering Device Information
The Device Information menu allows you to assign a name to ASMi-52L, define its
location and contact person. These entries may include up to 20 characters.

To enter device information:
1. From the Management menu, select Device Info.