Specifications

Controls and Indicators 3-1
Chapter 3
Operation
This chapter provides the following information for the ASMi-52L modem:
• ASMi-52L front-panel indicators
• ASMi-52L default settings.
• Configuration alternatives
• Operating procedures (turn-on and turn-off).
Installation procedures given in Chapter 2 must be completed and checked before
attempting to operate ASMi-52L.
3.1 Turning On the ASMi-52L

To turn on ASMi-52L:
• Connect the power cord to the mains.
The PWR indicator lights up and remains lit as long as ASMi-52L receives
power.
ASMi-52L requires no operator attention once installed, with the exception of
occasional monitoring of front panel indicators. Intervention is only required when
ASMi-52L must be configured to its operational requirements, or diagnostic tests
are performed.
3.2 Controls and Indicators
The front and rear panels of ASMi-52L include a series of LED indicators that show
the current operating status of the unit.
Figure 3-1 shows a front panel ASMi-52L unit in a plastic enclosure.
Table 3-1 lists and describes the front panel indicators. Table 3-2 lists and describes
the rear panel indicators
ASMi-52L
Figure 3-1. Typical ASMi-52L Front Panel