Specifications

Appendix C LRSI-F-27 Module Installation and Operation Manual
C-6 Installation and Setup ASMi-52CQ Ver. 2.12
Indicators
LRSI-F-27 features two front-panel LEDs that indicate the link integrity and the
Ethernet interface status. The function of each LED is described in
Table C-2 .
Table C-2. LRSI-F-27 LEDs
LED Color Location Indication
LINK Green Connector ON – Ethernet is connected
ACT Yellow Connector Blinking – Ethernet Rx/Tx
activity
LRSI-F-27 module operates with ASMi-52CQ-Ethernet card only.
LRSI-F-27 Module Switch Settings
Figure C-3 shows the LRSI-F-27 module DIP-switch SW1- SW4 settings. Table C-3
describes the DIP switch SW1- SW4 settings parameters.
Figure C-3. DIP Switch SW1 - SW4 Settings
The positions of the switches are read only after flow control and Ethernet
filtering power up reset.
Warnin
g