Specifications

Installation and Operation Manual Appendix B Parameter List
ASMi-52CQ Ver. 2.12 Displaying Modem Status B-13
Parameter Type Use Value Indication
HW VERSION Read Displays current hardware
version
HW PANEL
VERSION
Read Displays current LRSI panel
hardware version
LED STATUS Read Displays status of front
panel LEDs
ON, OFF (for
interpretation of
the LED states, see
Chapter 2
MODEM NAME: ASMi-52CQ
DEFINE MODEM PORT NUMBER: 1
SELECT MODEM : MODEM 1 LOCAL
WIRE MODE : 2W PS1 TYPE : NONE
SHDSL MODE : STU-C PS2 TYPE : NONE
BERT PATTERN : N/A
FRAMER TYPE : SLOTTED E1 ACTUAL ANNEX : ANNEX B
LINE STATUS A : SYNC LINE STATUS B :SYNC N/A
SHDSL STATUS A : DATA SHDSL STATUS B : N/A
LINE RATE A : 2048K + 8K LINE RATE B : N/A
LINE TOTAL RATE : 2048K + 8K ACTUAL PSD : ASYM PSD DISABLE
EOC COMP : PROPRIETARY TIP RING : NORMAL
CURRENT NOISE MARGIN A : 15 dB 12 dB : 0 dBs
CURRENT LOOP ATTN A : 0:0 dB 0:0 dB : 0.0 dB
MUX TYPE : E1 E1 + LAN : E1 + IR Serial IF
Figure B-6. Modem Status Screen: Second Screen
Table
B-7. Modem Status Screen: Second Screen Parameters
Parameter Type Use Value Indication
MODEM NAME Read Displays the modem type ASMi-52CQ
ASMi-52
Master ASMi-52CQ
Standalone ASMi-52 modem
SELECT
MODEM
Write Selects the modem MODEM1 LOCAL
MODEM2 LOCAL
MODEM3 LOCAL
MODEM4 LOCAL
Operational parameters are
set for one of the local
modems installed in the LRS-
24 chassis.
MODEM1 REMOTE
MODEM2 REMOTE
MODEM3 REMOTE
MODEM4 REMOTE
Operational parameters are
set for one of the remote local
modems
RATE
SUPPORTED
Read Data rate supported by
the modem
2M
4M