Specifications

Chapter 2 Installation and Operation Installation and Operation Manual
2-10 Connecting the Interfaces ASMi-52CQ Ver. 2.12
Connecting the LRSI-F-29 Interface
LRSI-F-29
D
C
E
L
I
N
E
1
2
Figure 2-8. LRSI-F-29
³ To connect the LRSI-F-29 interface module:
1. Connect the SHDSL cables terminated in RJ-45 connectors into the card
connectors marked LINE.
2. Connect the G.704 E1 unbalanced lines terminating in a 25-pin D-type female
connector into the card connector marked DCE. Depending on the interface,
use the following adapter cables available from RAD:
Table 2-4. LRSI-F-29 Interface Adapter Cables
Interface Type Cable Number Terminating Connectors
Unbalanced E1 CBL-LRSI21/DB25/UB/M 1 DB-25 to 8 male BNC coax
CBL-LRSI21/DB25/UB/F 1 DB-25 to 8 female BNC coax