Specifications

Installation and Operation Manual Chapter 2 Installation and Operation
ASMi-52CQ Ver. 2.12 Connecting the Interfaces 2-5
Connecting the LRSI-F-19 Interface
LRSI -F-19
L
I
N
E
1
2
3
4
DCE
Figure 2-3. LRSI-F-19
³ To connect the LRSI-F-19 interface module:
1. Connect the SHDSL cables terminated in terminal blocks into the connectors
marked LINE.
2. Connect a 68-pin SCSI adapter cable into the connector marked DCE.
Depending on the interface, use the following cables available from RAD:
Table 2-2. LRSI-F-19 Interface Adapter Cables
DCE Interface Type Cable Number Terminating Connectors
RS-530 CBL-CQ-RS530/F 4 female DB-25 RS-530
V.35 CBL-CQ-V35/F 4 female 34-pin V.35
X.21 CBL-CQ-X21/F 4 female DB-15 X.21