Specifications

Chapter 2 Installation and Operation Installation and Operation Manual
2-4 Connecting the Interfaces ASMi-52CQ Ver. 2.12
Connecting the LRSI-F-18 Interface
LRSI -F-18
L
I
N
E
1
2
3
4
DCE
Figure 2-2. LRSI-F-18
³ To connect the LRSI-F-18 interface module:
1. Connect the SHDSL cables terminated in RJ-11 connectors into the card
connectors marked LINE.
2. Connect a 68-pin SCSI adapter cable into the connector marked DCE.
Depending on the interface, use the following cables available from RAD:
Table 2-1. LRSI-F-18 Interface Adapter Cables
DCE Interface Type Cable Number Terminating Connectors
RS-530 CBL-CQ-RS530/F 4 female DB-25 RS-530
V.35 CBL-CQ-V35/F 4 female 34-pin V.35
X.21 CBL-CQ-X21/F 4 female DB-15 X.21