System information

Appendix A Active Alarms RADview-EMS ASMi-52 User’s Manual
A-8 DTE (V.35, X.21, RS-530) Port Levels – Active Alarms
Table A-5. E1/T1 Port Level Active Alarms (Cont.)
Code Severity Description
38
Major E1 MF SYNC LOSS
Local loss of LRS52 frame synchronization occurred
39
Major E1 MF REMOTE SYNC LOSS
Remote loss of LRS52 frame synchronization occurred
40
Major E1 TS NUM NOT X128
For 4 Wire modem, user set time slot with number that is not a multiple of
X 128
Note: This alarm will only appear when both E1 and V.35 interfaces are present
(or any other interface which is not G704)
41
Major E1 TS NUM NOT COMP
Number of time slots in NE and FE do not correspond
A.5 DTE (V.35, X.21, RS-530) Port Levels – Active Alarms
Active alarms may be displayed at the DTE (V.35, X.21, RS-530) port levels.
Table A-6 lists the active alarms at the DTE (V.35, X.21, RS-530) port levels.
Table A-6. DTE (V.35, X.21, RS-530) Port Level Active Alarms
Code Severity Description
1
Major SELF TEST ERROR
Failure occurred while testing the port hardware components
4
Warning LLB FROM DTE
Local loopback activated by physical connector
Note: This alarm will only appear if the V.35 or RS-530 interface is present
5
Warning RLB FROM DTE
Remote loopback activated by physical connector
Note: This alarm will only appear if the V.35 or interface is present
51
Major EXTERNAL TO INTERNAL CLOCK
Clock missing at the external clock source