System information

RADview-EMS ASMi-52 User’s Manual Chapter 4 Performance Monitoring
E1/T1 Port Level – Statistics Menu 4-11
Table 4-6. Accumulated Data Parameters
Parameter Possible Values/Remarks
Location
Near-End, Far-End
SHDSL Mode
STU-C, STU-R
Port
CONTROL, ETH, SHDSL Link, E1, T1, DTE (V.35, X.21, RS-530)
Far-End Modem
Type
Unknown, ASMi-52, ASMi-52 Master, ASMi-52 Slave, ASMi-52/CD, ASMi-52/CQ,
LRS-52, FCD-IP, FCD-IPM, D8SL, MP-SHDSL
Errored Seconds
(ES)
The number of errored seconds
Severely Errored
Seconds (SES)
The number of severely errored seconds
CRC Anomalies
(CRCA)
The CRC (Cyclical Redundancy Checking) anomalies that have accumulated
Loss of Sync
Word (LOSW)
Seconds
The number of sync word seconds that have been lost
Unavailable
Seconds (UAS)
The number of unavailable seconds
[Close] Click <Close> to close the Accumulated Data dialog box
[Poll] Click <Poll> to poll the Agent
Clearing Statistics for the SHDSL Link Port
The Statistics > Clear Statistics command enables you to clear port statistics at
the SHDSL Link port level.

To clear port statistics at the SHDSL Link port level:
• At the SHDSL Link port level, select Statistics > Clear Statistics…
The statistics for the SHDSL Link port are cleared.
4.4 E1/T1 Port Level – Statistics Menu
The Statistics menu allows you view and clear statistics data at the E1/T1 port
level.
Figure 4-10. E1/T1 Port Level Statistics Menu