System information

RADview-EMS ASMi-52 User’s Manual Chapter 3 Configuration Management
Ethernet Port Level – Configuration Menu 3-25
Parameter Possible Values / Remarks
Loop Attenuation
(dB)
0…127
SNR Margin (dB)
0…15
Tx Power (dBm) The Tx Power of the port, in the format x.y
1…6500.0
Power Back Off
(dB)
0…6
[Close] Click <Close> to close the Port Status dialog box
[Refresh] Click <Refresh> to update the Port Status dialog box
3.6 Ethernet Port Level – Configuration Menu
The Configuration menu enables you to configure at the ETH port level.
Figure 3-24. ETH Port Level Configuration Menu
Configuring the ETH Port Parameters
The Parameters command enables you to configure the ETH port parameters.

To configure the ETH port parameters:
1. At the ETH port level, select Configuration > Parameters…
2. Configure the desired parameters and click <Set>.
Figure 3-25. Port Parameters Dialog Box