System information

Chapter 3 Configuration Management RADview-EMS ASMi-52 User’s Manual
3-24 SHDSL Link Port Level – Configuration Menu
Figure 3-23. Port Status Dialog Box
Table 3-19. Port Status Parameters
Parameter Possible Values / Remarks
Location
Near-End, Far-End
SHDSL Mode
STU-C, STU-R
Port
CONTROL, ETH, SHDSL Link, E1, T1, DTE (V.35, X.21, RS-530)
Far-End Modem
Type
Unknown, ASMi-52, ASMi-52 Master, ASMi-52 Slave, ASMi-52/CD, ASMi-52/CQ,
LRS-52, FCD-IP, FCD-IPM, D8SL, MP-SHDSL
Connected
Modem/Port No:
For an LRS Quad card, FE modem number 1…4
For a DXC DSL card, external port number 1…n
For a MP MSL card, external port number 1…n
For an LRS-52 modem, 1…24
All other modems, NA
Note: This field is only visible for a NE modem connected to one of the above options
Line Rate (Kbps) The line rate of the port (in kilobytes per second)
Tip Ring
Normal, Reversed
Line Status
No Sync, Sync
SHDSL State
Idle Mode, Data Mode, Boot Upload, Boot Upload Done, Startup Handshake in
Progress, Startup Training in Progress, Framer Sync in Progress, Local Analog
Loopback in Progress, Remote Core Loopback in Progress, Local Digital Loopback
in Progress, Spectrum Test in Progress