System information

Chapter 3 Configuration Management RADview-EMS ASMi-52 User’s Manual
3-18 Modem Level – Diagnostics Menu
Resetting the Configuration
The Reset command enables you to reset the modem hardware, the modem
configuration, and the modem line.
These commands are not available for an unmanaged or unknown FE modem.
Resetting the Modem Hardware
The Reset > Modem HW command enables you to reset the modem hardware.

To reset the modem hardware:
• At the modem level, select Configuration > Reset > Modem HW.
The modem hardware is reset.
Resetting the Modem Configuration
The Reset > Configuration command enables you to reset the modem
configuration.

To reset the modem configuration:
• At the modem level, select Configuration > Reset > Configuration.
The modem configuration is reset.
Resetting the Line Configuration
The Reset > Line command enables you to reset the line configuration.

To reset the line configuration:
• At the modem level, select Configuration > Reset > Line.
The line configuration is reset.
3.4 Modem Level – Diagnostics Menu
The modem level Diagnostics menu allows you to test modem diagnostics.
Figure 3-18. Modem Level Diagnostics Menu
Testing the Modem Diagnostics
The Test command enables you to test the modem diagnostics.
This command is not available for the FE modem.

To test the modem diagnostics:
• At the modem level, select Diagnostics > Test…
Note
Note