System information

Chapter 3 Configuration Management RADview-EMS ASMi-52 User’s Manual
3-4 System Level – Options Menu
Figure 3-5. Host Interface Change Dialog Box
Table 3-3. Host Interface Change Parameters
Parameter Possible Values / Remarks
Host The name of the Host
ETH, Dedicated TS
IP Address The IP address of the Host
Note: An IP address of 0.0.0.0 indicates there is no Host
IP Mask The IP Mask of the Host
Note: An IP address of 0.0.0.0 indicates there is no Host
Host Tagging
Tagged, Untagged
Note: This field only exists if the Host type is ETH
[Set] Click <Set> to set the configured parameters
[Cancel] Click <Cancel> to close the Host Interface Change dialog box