System information

RADview-EMS ASMi-52 User’s Manual Chapter 3 Configuration Management
System Level – Options Menu 3-3
Viewing the Host Interface List
The Host Interface List command enables you to view and configure the Host
Interface List.

To display the Host Interface List:
• At the system level, select Options > Host Interface List…
Figure 3-4. Host Interface List Dialog Box
Table 3-2. Host Interface List Parameters
Parameter Possible Values / Remarks
Host The name of the Host
ETH, Dedicated TS
IP Address The IP address of the Host
Note: An IP address of 0.0.0.0 indicates there is no Host
IP Mask The IP Mask of the Host
Note: An IP address of 0.0.0.0 indicates there is no Host
Host Tagging
Tagged, Untagged
Host VLAN ID
1…4094
Host Priority Tag
0…7
[Change] Click <Change> to open the dialog box
[Close] Click <Close> to close the Host Interface List dialog box
[Refresh] Click <Refresh> to update the Host Interface List dialog box
Configuring Host Interface

To configure host interface:
1. At the system level, select Options > Host Interface List…
2. Select the host interface you want to configure and click <Change…>.
3. Configure the desired parameters and click <Set>.