System information

System Level – Fault Menu 2-1
Chapter 2
Fault Management
This chapter describes ASMi-52 fault management at the system, modem, port,
and repeater levels.
2.1 System Level – Fault Menu
The Fault menu provides access to the system alarm options.
Figure 2-1. System Level Fault Menu
Masking the Alarms
The Mask Alarms command enables you to mask the alarms of all modems and
repeaters.

To mask the alarms of all modems and repeaters:
1. At the system level, select Fault > Mask Alarms...
Figure 2-2. Mask Alarms Dialog Box
2. Select or deselect the Mask Alarms checkbox and click <Set>.
If you mask an alarm, it will not appear in the alarm list or history log. In addition,
no alarm trap will be sent for the corresponding port.
Clearing the History Log
The History Log > Clear All command enables you to clear all entries in the
alarm buffer.

To clear all entries in the alarm buffer:
• At the system level, select Fault > History Log > Clear All.
All entries in the alarm buffer are cleared.
Note