System information

Chapter 1 Introduction RADview-EMS ASMi-52 User’s Manual
1-10 DTE (V.35, X.21, RS-530) Port Levels Operations
Table 1-8. E1 and T1 Port Management Options (Cont.)
Tasks –
Configuration
Dialog Box and/or Parameter
Location
Path
Configuring the
parameters for the
E1 port
Port Parameters Dialog Box
Refer to Configuring the Parameters
for the E1 Port in Chapter 3.
Configuration
´Parameters…
Configuring the
parameters for the
T1 port
Refer to Configuring the Parameters
for the T1 Port in Chapter 3.
Configuration
´Parameters…
Tasks – Statistics Dialog Box and/or Parameter
Location
Path
Viewing BPV
statistics
BPV Statistics Dialog Box
Refer to Viewing BPV Statistics in
Chapter
4.
Statistics
´BPV…
Viewing current
15-minute port
data
15 min Current Data Dialog Box
Refer to Viewing Current 15-Minute
Port Data in Chapter
4.
Statistics
´15 min Current Data…
Viewing 15-minute
interval port data
15 min Interval Data Dialog Box
Refer to Viewing 15-Minute Interval
Port Data in Chapter
4.
Statistics
´15 min Interval Data...
Clearing statistics
for the E1/T1 port
Refer to Clearing Statistics for the
E1/T1 Port in Chapter
4.
Statistics
´Clear Statistics…
1.8 DTE (V.35, X.21, RS-530) Port Levels Operations
Table 1-9 lists the different management options for the DTE (V.35, X.21, RS-530)
port levels.
Table 1-9. DTE (V.35, X.21, RS-530) Port Management Options
Task – Fault Dialog Box and/or Parameter
Location
Path
Displaying the
active alarms at the
DTE (V.35, X.21,
RS-530) port levels
Port Active Alarm List Dialog Box
Refer to Displaying the Active Alarms
at the DTE (V.35, X.21, RS-530, IR-IP)
Port Levels in Chapter
2.
Fault
´Active Alarms…
Task –
Configuration
Dialog Box and/or Parameter
Location
Path
Configuring the
DTE (V.35,
RS-530) port
parameters
Port Parameters Dialog Box
Refer to Configuring the DTE (V.35,
RS-530) Port Parameters
in
Chapter 3.
Configuration
´Parameters…