Specifications

System Installation
RADring
Installation & Operation Manual
3-16 Replacing The Ventilation Fan 3/11/98 12:29
5. Attach the wires of the replacement fan to the connector wires using the
joiner supplied in the replacement kit. Be sure to attach the RED
connector wire to the RED fan wire and the BLACK connector wire to
the BLACK fan wire. When the wires are inserted in the joiner, press
firmly on the joiner top to lock the wires in place.
6. Reattach the connector to the hub.
7. Reattach the fan to the faceplate using the screws a - d.
8. Secure the faceplate to the hub enclosure with screws 1 - 4.