Specifications

Introduction

RADring

Installation & Operation Manual

1-12 System Configuration 8/11/98 12:03

Sattelite Configuration

The Satellite configuration is installed as part of a larger network through the

connection of additional hubs as in the Multi-hub configuration. The Satellite

configuration lobes are used to create a star topology by connecting access

units or hubs to the lobes of a central hub rather than RI/RO ports. The

remaining lobes can be used to connect to the stations. The Satellite

configuration allows central connection of all the hubs, enabling easy

management of large installations (multistory, campus, etc.). The Ring-In port

of the satellite hub can be connected over UTP, STP or fiber media, with the

use of an appropriate module (TCR, TFR, TFC). Figure 1-5 depicts a satellite

application.

STP

TCR

TFC

TFR

3ULPDU\ 5LQJ

6DWHOOLWH 5LQJ

5$'ULQJ

S-TAU

UTP/STP

Server

FIBER

Figure 1-5 Satellite Application (Fiber, STU/UTP)